loader

eGP GED-18/21-22 Supply & installation of Fuel Filter, Lube Oil Filter, Air Filter, Radiator Coolant, Self Starter, Flexible Cable 70 mm etc. for maintenance work of Power Car under SSAE/E/SYT.

World Biggest Tenders Source

This tender with title eGP GED-18/21-22 Supply & installation of Fuel Filter, Lube Oil Filter, Air Filter, Radiator Coolant, Self Starter, Flexible Cable 70 mm etc. for maintenance work of Power Car under SSAE/E/SYT. has been published on Bidding Source portal dated 23 Jun 2022 for the country of Bangladesh. It has been categorized on Cable, wire and related products & Oil filters & Fuels & Turbine lube oils & Car repair services & Radiators & Compressor lube oils & Air filters & Cable & Passenger cars & Central-heating radiators & Car maintenance services & Petroleum products, fuel, electricity and other sources of energy. For similar tenders you can see tenders mentioned below of this page.

General Information

eGP GED-18/21-22 Supply & installation of Fuel Filter, Lube Oil Filter, Air Filter, Radiator Coolant, Self Starter, Flexible Cable 70 mm etc. for maintenance work of Power Car under SSAE/E/SYT.
Invitation to Tender
54.01.0000.212.07.490.21
Bangladesh
Dhaka
23 Jun 2022
3 Jul 2022
English
Cable, wire and related products , Oil filters , Fuels , Turbine lube oils , Car repair services , Radiators , Compressor lube oils , Air filters , Cable , Passenger cars , Central-heating radiators , Car maintenance services , Petroleum products, fuel, electricity and other sources of energy

For viewing full details of tenders, you should Log in to your account. If not registered yet, Please Register Now

Or Request a call back now and one of our representatives will contact you. Contact us

Similar Tenders

GR_011 Procurement of Air Filter, Coolant Filter, Separator Filter, Coolant etc For the Instrument air Compressor of Bhola 225 MW CCPP Bangladesh e-GP Proc-27/2022-2023 Supply of Engine Overhauling & Change of Suspension for sedan Car (Car No- Dhaka Metro-Ga-29-8255) Bangladesh e-GP/EE/NRD/Rev./05/2022-2023 Supplying of different size best quality steel wire Rope and U-Clamp at RHD Stackyard for use in Kalia Ferryghat at 21st km of Narail-Kalia Road (Z-7502) under Road Division,Narail during the year 2022-2023. Bangladesh GB-7/004 Procurement of Coal based fuel item (Hard Coke) (Foundry Grade) under GB-7 Class for CME-East. Bangladesh 1. A) Drilling Machine Set: The Manually Operated Drilling machine will run in the field of 2D Seismic operation. Proper base fitting and other accessories are required. The machine will run about 10 hours/day (with cycle of 1 hour runtime and 15 minutes stop time). The system has to be easy portable for seismic drilling (manual) operation (in hard formation/area) (45 m depth).?5 meter Sets 56 Each Drilling Machine set includes following items with mentioned nos./set( Each parts must be Compatible with drilling machine & accessories) i) Pump with Engine:Gasoline operated engine coupled with high pressure centrifugal small, narrow type, cast iron made, capable of welding &soldering (non-aluminum) pump. Pump type:Trash Centrifugal, Self-Priming, air-cooled type, Suction diameter=75mm, delivery diameter=50mm (Approx.) Engine : Force air-cooling, 1 cylinder, 4-stroke OHV gasoline engine Output power: 7 hpor Higher (5.1 Kwh or Higher) (3600r/min) Displacement: 242 cc or Higher Rated discharge capacity: 1200 to 1500 (L/ min) Maximum Discharge Capacity: 1500 L/min Suction Head Lift: 8 m Total head lift : 27m Fuel capacity : 6L Dimensions (mm) (LxWxH): 660 x 495 x 515 (Approx.) Net Dry weight: 50 kg (? 5 kg) Set 01 ii) Swivel: Compatible with drilling pipe and delivery hosepipe. Steel made U-type swivel, outer bent, bent at the middle of the length, compatible with pump delivery hose, easy to joint by clamp with delivery hosepipe & output side compatible (easy to joint by threads) with drill pipe. The internal diameter =41mm@ 3 threads per 25mm. Use three-class sealing to seal water to prevent from water leakage. The sealing pressure = 150 psi. Use quick joint to couple the swivel with delivery hose of pump. Nos. 02 iii) Fire hosepipe: Compatible with Pump. 2 inch Flexible heavy duty lay flat rubber hose canvas inside double rubber coated type fiber & wired hose. Compression resistance is higher than 100 psi. Each one length = 50ft (15 m). With adapter and clamp on each end (male & female), equipped with seal valve and net filter. Nos. 15 iv) Delivery hosepipe: Compatible with swivel & Pump. 2 inch Flexible heavy duty lay flat rubber hose canvas inside double rubber coated type fiber & wired hose. 25 ft. (7.62m) length with adapter and clamp on each end, Compression resistance is higher than 100 psi. One side use a quick joint to couple the swivel, other side use an adapter and clamp to couple the pump . Nos 04 v) Drilling pipe (Iron made, durable): Compatible with swivel & drilling bit.Overall length, with one end Male & other end Female adapter rigidly joint with the pipe, capable of gentle & easy joint / coupling with other pipe, 10 feet (3.05m). Diameter of main pipe: Outer 1.75 inch (45mm) and inner 1.3 inches (33mm). Adapter size: Male-Length 3 inch (including 2 inch outer thread), compatible & Female-Length 3 inch (inner thread), right hand threaded. Thread per 25mm=3. Socket, inner diameter = 25 mm. Weight- 20kg (?1kg). Nos 05 vi) Bit: Compatible with drilling pipe.Three wing/blade Polycrystalline diamond compact (PDC) triangular drag drilling bit. 4 inch(100 mm) diameter, total length 6 inch(150mm), effective cutting length 4.25inch(110mm) with 4 inch(100mm) transition joint matching (coupling adapter) with drilling pipe. Nos. 04 vii) Pipe wrench: Compatible with drilling pipe, Swivel and bit. Heavy duty 24" (600 mm), steel made, self-cleaning adjustment nut, durable fixed coated grip handle, best quality (welding & soldering able) pipe wrenches. Nos. 12 viii) Tool Box: Standard portable tool box, including compatible tools & accessories. These items are: Set 01 Manual tool box 1 pc Monkey wrench 1 pc Wire cutter 1 pc Air Filter 1 pc Fuel filter 1 pc Screw driver, 300x2x13 1 pc Cross head Screw driver, 200x1.2x8 1 pc Special spanner for centrifugal pump 1 pc Spark plug spanner 1 pc Sparking plug 15 pcs Safety Helmet 04 pcs Rubber shim 06 pcs Sealing ring 06 pcs Head Gazket 15 Pcs B) Top-head automotive rotary mud drilling machine set (DeepRock Hydra-Drill - Model HD2001 or Equivalent): Light weight, convenient to operate, high speed suitable for drilling seismic shot hole in moderately hard Sand, Shale, Clay & Gravel formation. Maximum drilling Depth: 45m (?5m) Weight of any single module should not more than 70 kg. No wheels on tripod. Sets 04 Each Drilling machine set includes following items (Each parts must be Compatible with Top-head automotive rotary mud drilling machine &accessories ) i) Power Head : 6hp or Higher ,4-cycle octane/diesel engine No. 01 ii) Re-circulating Mud pump: Octane/diesel operated engine coupled with centrifugal, narrow type, cast iron made, welding & soldering able pump (nonaluminum) and air cooled type. Suction diameter=75mm, delivery diameter=50mm (Approx.) Pump type :Trash Centrifugal, Self-Priming Engine : OHV gasoline engine Output power: 7 hp or Higher (3600r/min) Displacement: 242 cc or Higher Rated discharge capacity: 1200 to 1500 L/ min Maximum Discharge Capacity: 1500 L/min Suction Head Lift: 8 m Total head lift : 27m Fuel capacity : 6L Dimensions (mm) (LxWxH): 660 x 495 x 515 (Maximum) No. 01 iii) Gear Box : Commercial grade quality, 25:1 gear reduction, more than 315 ft-lbs of torque providing steel gearbox No. 01 iv) Swivel: Compatible with Power head, drilling pipe and delivery hosepipe connecting mud pump. Heavy Steel made long life full flow water course U-type swivel, bent at the middle of the length, compatible with pump delivery hose, easy to joint by clamp with delivery hosepipe & output side compatible(easy to joint by threads) with drill pipe. The internal diameter =41mm@ 3 threads per 25mm. Use three-class sealing to seal water to prevent from water leakage. The sealing pressure at least 150 psi. Use quick joint to couple the swivel with delivery hose of pump. Nos. 02 v) Drilling pipe sized in 5'/1.5 m lengths: Compatible with swivel and drilling bit. Overall length, with one end Male &other end Female adapter rigidly joint with the pipe, capable of gentle & easy joint / coupling with other pipe. Diameter of main pipe: Outer 1.75 inch (45mm) and inner 1.3 inches (33mm). Adapter size: Male-Length 3 inch (including 2 inch outer thread), compatible & Female-Length 3 inch (inner thread), right hand threaded. Thread per 25mm=3. Socket, inner diameter = 25 mm. Weight- 10kg (?1kg). Nos. 20 vi) Bit:Compatible with drilling pipe.Three wing/blade Polycrystalline diamond compact (PDC) triangular drag drilling bit. 4 inch(100 mm) diameter, total length 6 inch(150mm), effective cutting length 4.25inch(110mm) with 4 inch(100mm) transition joint matching (coupling adapter) with drilling pipe. Nos. 04 vii) Delivery hosepipe: Compatible with swivel & Pump. 2 inch Flexible heavy duty lay flat rubber hose canvas inside double rubber coated type fiber & wired hose. 25 ft. (7.62m) length with adapter and clamp on each end, Compression resistance is higher than 100 psi. One side use a quick joint to couple the swivel, other side use an adapter and clamp to couple the pump. Nos. 04 viii) Fire hosepipe: Compatible with Pump. 2 inch Flexible heavy duty lay flat rubber hose canvas inside double rubber coated type fiber & wired hose. Compression resistance is higher than 100 psi. Each one length = 50ft (15 m). With adapter and clamp on each end (male & female), equipped with seal valve and net filter. Nos. 15 ix) Pipe wrench: Compatible with drilling pipe, Swivel and bit. Heavy duty 24" (600 mm), steel made, self-cleaning adjustment nut, durable fixed coated grip handle, best quality (welding & soldering able) pipe wrenches. Nos. 12 x) Tool Box: Standard portable tool box, including compatible tools for maintenance of each drilling machine & accessories. Set. 01 xi) Mounting : Tripod round Power Mast Nos. 02 2. 3 KVA Octane Genaretor: 3Phase, 50 Hz, 220 volt with Canopy + ATS System Octane generator, Low noise running, digital control panel, low oil alarm system, automatic voltage regulator. Nos. 05 3 KVADeisel Genaretor: 3Phase, 50 Hz, 220 volt with Canopy + ATS System diesel generator, Low noise running, digital control panel, low oil alarm system, automatic voltage regulator. Nos. 04 3. Delivery hosepipe: Compatible with swivel & drilling engine pump. 2 inch Flexible heavy duty lay flat rubber hose canvas inside double rubber coated type fiber & wired hose. 26.25 ft. (8m) length with adapter and clamp on each end, Compression resistance is higher than 100 psi. One side use a quick joint to couple the swivel, other side use an adapter and clamp to couple the pump. Nos. 200 4. Fire hosepipe: Compatible with drilling engine pump2 inch flexible heavy duty lay flat rubber hose canvas inside double rubber coated type fiber & wired hose. Compression resistance is higher than 100 psi. Each one length = 65.62ft (20 m). With adapter and clamp on each end (male & female), equipped with seal valve and net filter. Nos. 400 5. Suction hosepipe: Flexible type, transparent plastic fiber & wired hose. Compression resistance is higher than 100 psi. Each one length= 20ft (6.1m). With adapter and clamp on each end (one side to joint with pump & other side with water source), equipped with sit valve and net filter. feet 600 6. Loading Pole: The loading pole is 1-1/4 straight hollow aluminum pole used for placing and compacting explosive charges in bore holes. The aluminum ball need to coupled together with an aluminum socket to connect tamping poles. Ball and socket fittings provide a sturdy connection. Compression resistance is higher than 100 psi. Each one length= 8ft (2.44m). Outer diameter of pole =4 inch Nos. 150 Bangladesh GR-52/3005/Caab/HSIA/2021-2022 O & M of E/M works at Hazrat Shahjalal International Airport, Kurmitola, Dhaka during the 2020-2021 (S.H:- Unseen/Emergency works under E/M Division-2 Providing & Installation of Induction light fittings, pole, base, services cable in/c other E/M works at The main entrance of Kawlar R/A. Bangladesh 46.05.0000.424.37.091.22.42 Supply of HT Cable jointing kit for straight through cable joint at different pump station under MODS circle -2 ,DWASA. Bangladesh e-GP/16/EE/KRD/2022-23 Supply of Steel Wire Rope & U-Clamp for Ferry's and Pontoon at Dighirpar Ferry Ghat under Kishoreganj Road Division during the year 2022-2023. Bangladesh e-gp-01/EE/FWD/S-01/2022-2023 Supply of spare parts Engine Overhauling, Fuel Pump, Electric system, brake, suspension, denting-painting & other repairing works of Pajero Jeep No- Dhaka Matro-Gha-02-0501 under RHD, Workshop Division, Feni during the year 2022-2023. Bangladesh e-gp-10/EE/FWD/S-10/2022-2023 Supply of spare parts for Fuel Pump, clutch, brake, Denting-Painting & other necessary repairing works of Isuzu Mechanical Cran Truck (On Test) under RHD, Workshop Division, Feni during the year 2022-2023. Bangladesh
No. 12, 1 st floor, Block B2, EGS Business Park, World Trade Center, Bakirkoy - Istanbul - Turkey
info@biddingsource.com
24 X 7 online support
TOP
For viewing latest tenders published for your business in all over the World: Sign in Join free
For accessing full details of Tenders, Kindly choose the Plan that works for you: View Subscription Plans